AEG HR 5655 - Manual (Page 45)

English
45
Cleaning and Maintenance
WARNING:
Before cleaning the handset with water, disconnect it from the connection cable.
CAUTION:
• Do not use a wire brush or other abrasives.
• Do not use sharp or abrasive cleaning agents.
This device can be cleaned under running water.
1. Switch of the shaver.
2. Press the shaving head buttons.
3. Rinse the shaving head thoroughly under running water.
4. Let the cleaned parts dry.
Alternatively, clean the shaver with the brush provided.
Maintenance and replacement
• Clean the shaving head thoroughly once a month. If necessary, use special cleaning
aids available in specialist shops.
• Lubricate the shaving foils and long hair cutting attachment with a light machine oil (a
few drops suffice).
Replacement of shaving parts
To maintain the shaving performance at 100 %, replace the cutting parts at the latest every
18 months or when the parts show wear. We recommend changing the parts as a set.
Noise emission
The workplace-related emission value is less than 70 dB(A).