Agilent Technologies FS2010 - Manual (Page 9)

9
*For 32 bit analysis load the timing or state configuration file into a single
logic analyzer card. If you are using a 16910 card then only one card is
required for 64 bit analysis.
Configuration Files
167xx Analyzer 169xx Analyzer File name for
State/Timing Analysis Description
16715/6/7/9 or
1674X or
16750/1/2 1680/90,
16750/1/2,
1691x CP210_1 *2 card state
analysis
16715/6/7/9 or
1674X or
16750/1/2 1680/90,
16750/1/2,
1691x CP210_2 *2 card timing
16715/6/7/9 or
1674X or
16750/1/2 1680/90,
16750/1/2,
1691x CP210_3 1 card eyefinder
config
16753/4/5/6 16753/4/5/6,
1691x
CP210_4 1 card eyescan
config