AEG HT 5580 - Manual (Page 28)

English
28
Use
Turn the device on by the lower switch on the handle.
Select an air stream level on the handle (lower switch):
Position : off
Position : gentle stream of air
Position : strong stream of air
Setting the Temperature Level (upper switch ):
Position : low temperature
Position
: medium temperature for
gentle drying and shaping.
Position
: high temperature for rapid
drying.
COOL SHOT (Cold Air)
With this switch you can stop the heating pro-
cess.
Keep the button pressed according to the desired interval
length. When the button is released it returned automatically
to the initial position.
Switch-off
After use, turn the lower switch to be “ ” position and
remove the mains plug.
Storage
• Leave the device to cool before putting it away!
• Hang the device up by the suspension eye.
Mains Cable
• The mains cable should only be wound up loosely.
• Never tie the cable tightly round the device, as over time
this may result in the cable breaking.
• Check the mains cable regularly for damage.
Cleaning and care
WARNING:
• Before cleaning remove the mains lead from the socket.
• Under no circumstances should you immerse the device
in water for cleaning purposes. Otherwise this might
result in an electric shock or fire.
CAUTION:
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
Clean the housing with a soft, dry cloth without additives.
Air Intake Grill
Please clean the grill on the air intake side of the hairdryer
regularly in order to avoid excessive temperatures as a result
of heat accumulation.
• Hold the intake grille on the markings and press in gently
on the markings. Then pull off the grille towards the rear.
• Remove any dirt that is present.
• If necessary, a fine brush can be used.
• Close the grille by locking it into place.
Noise development
The sound pressure level in the ear of an operator (LpA) was
measured according to DIN EN ISO 3744.
Sound pressure level detected: 76 dB(A) (no limit)
Technical Specifications
Model: ..................................................................................HT 5580
Power supply: ..........................................................230 V, 50/60 Hz
Power consumption: ................................................ max. 2300 W
Protection class: ...............................................................................II
Net weight: ............................................................ approx. 0.55 kg
Subject to technical changes without prior notice!
This device has been tested according to all relevant cur-rent
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Disposal
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of electrical equip-
ment in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of reutili-
sation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.