Beko DP 8045 CW - Manual (Page 21)

21 EN
EN 2
Programmes Capacity (kg)
Spin speed in washing
machine (rpm)
Approximate
amount of
remaining
humidity
Drying time
(minutes)
Cottons / Coloureds
A Extra dry 8 1000 60 % 190
A Cupboard dry 8 1000 60 % 175
A Iron dry 8 1000 60 % 150
Baby Clothing 3 1000 60 % 80
Shirts 1.5 1200 50 % 50
Jeans 4 1200 50 % 120
Daily Quick 4 1200 50 % 90
Mix 4 1000 60 % 115
Sportswear 4 1000 60 % 105
Xpress 45 min. 1 1200 50 % 45
Delicates 2 600 40 % 55
Wool Refresh 1.5 600 50 % 8
Synthetics
B Cupboard dry 4 800 40 % 70
B Iron dry 4 800 40 % 55
Energy consumption values
Programmes Capacity (kg)
Spin speed in washing
machine (rpm)
Approximate
amount of
remaining
humidity
Energy
consumption
value kWh
Cottons linen Ready to
wear*
8 1000 60 % 2,68
Cottons Ready to iron 8 1000 60 % 2.1
Synthetics Ready to wear 4 800 40 % 0,95
Auxiliary functions
Audio Warning
The machine will give an audio warning
when the programme comes to an end.
If you do not want the machine to give an
audio warning, press the Volume Level
button repeatedly until "x" appears on the
display. Use the same button to adjust
the volume level.
C
You can activate this function either
before or after the programme starts.
Cancel
audio warning
Audio warning
level 1
Audio warning
level 2
Audio warning
level 3
Dryness level
Used to adjust the required dryness level.
More drying is performed compared
to the default settings when "+" sign
appears and less drying is performed
when "-" sign appears. Programme
duration can change depending on the
selection.
C
You can activate this function only
before the programme has started.
Anti-creasing
You can use Anti-creasing function to
prevent laundry from creasing if you
will not take the laundry out after the
programme has come to an end. This
programme rotates the laundry in every
240 second for 2 hours to prevent
creasing.
Anti-creasing is activated but the
programme is still running in the first
display image below. Drying cycle is
completed and the Anti-creasing step has
started in the second display image.
C
Press Anti-creasing button to activate
this function.
Changing the contrast
Adjust the display contrast in order to
make the symbols on the display appear
clearer. It may particularly be necessary to
change the contrast setting of the display
when the dryer is installed over a washing
machine.
Press and hold the Spin Speed / Timer
Programme button for 3 seconds.
When the contrast is changed, all
symbols on the display will appear for
3 seconds in order to indicate that the
process is complete.
C
Perform the same procedure to revert
back to the previous contrast setting.
Warning symbols
C
Warning symbols may differ
according to the model of your
machine.
Lint filter cleaning
When the programme is completed, a
warning symbol will appear to remind that
the filter needs to be cleaned.
C
If the Filter Cleaning symbol flashes
continuously, refer to “Troubleshooting”
section.
Water tank
When the programme is completed, a
warning symbol will appear to remind that
the water tank needs to be drained.
If the water tank becomes full while
the programme is running, the warning