AEG A62700HLW0 - Manual (Page 27)

Problem Possible cause Solution
The appliance does
not work at all. Nei-
ther cooling nor
lighting works. Plug is not connected to
the mains socket proper-
ly. Connect the mains plug
properly.
Power does not reach the
appliance. Try connecting another
electrical device to the
power outlet.
The appliance is not
switched on. Switch on the appliance.
There is no voltage in the
mains socket (try to con-
nect another appliance
into it). Call an electrician.
9.1 Customer Service
If your appliance is still not working
properly after making the above checks,
contact the nearest service centre.
To obtain fast service, it is essential that
when you apply for it you specify the
model and serial number of your appli-
ance which can be found either on the
guarantee certificate or on the rating
plate located on the external right side
of the appliance.
9.2 Replacing the lamp
1. Disconnect the mains plug from the
mains socket.
2. Replace the used lamp with a new
lamp of the same power and specifi-
cally designed for household appli-
ances. (the maximum power is
shown on the lamp cover)
3. Connect the mains plug to the mains
socket.
4. Open the lid. Make sure that the
lamp comes on.
WARNING!
Do not remove the lamp cover at
the time of replacement.
Do not operate the freezer if the
lamp cover is damaged or miss-
ing.
ENGLISH
27