Changing the needle stop position – Brother CS-8060 User Manual
Page 113
Advertising
Changing the needle stop position 107
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
Changing the needle stop position
Normally, the sewing machine is set to leave the needle in the fabric when sewing is stopped. Instead, the
machine can be set to leave the needle raised when sewing is stopped.
1
Turn off the sewing machine.
2
While pressing the left stitch selection key
(
), turn on the sewing machine.
X
The needle stop position changes to the
raised position.
Memo
• Perform the same operation to change the
needle stop position to the lowered position.
S2_brotherE.book Page 107 Wednesday, May 14, 2003 8:05 PM
Advertising