First use, Temperature regulation, Ambient switch function – AEG SCN91800C1 User Manual

Page 30: Cleaning the interior

Advertising
background image

Temperature regulation

The temperature is automatically regulated.

To operate the appliance, proceed as follows:
• turn the Temperature regulator toward lower settings to obtain the minimum coldness.
• turn the Temperature regulator toward higher settings to obtain the maximum coldness.
A medium setting is generally the most suitable.

However, the exact setting should be chosen keeping in mind that the temperature in-

side the appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
If the ambient temperature is high or the appliance is fully loaded, and the appliance is

set to the lowest temperatures, it may run continuously causing frost to form on the

rear wall. In this case the dial must be set to a higher temperature to allow automatic

defrosting and therefore reduced energy consumption.

Ambient Switch function

If room temperature lower than +16° activate

the Ambient Switch function pressing the switch

(A).

The built-in light will turn on.

FIRST USE

Cleaning the interior

Before using the appliance for the first time, wash the interior and all internal accesso-

ries with lukewarm water and some neutral soap so as to remove the typical smell of a

brand-new product, then dry thoroughly.
Do not use detergents or abrasive powders, as these will damage the finish.

A

30

First use

Advertising