2 closing the door, 3 replacing the lamp, Installation – AEG S53634CSX2 User Manual

Page 32: 1 positioning

Advertising
background image

Problem

Possible cause

Solution

The food products' tem-
perature is too high.

Let the food products temper-
ature decrease to room tem-
perature before storage.

Many food products are
stored at the same time.

Store less food products at the
same time.

The thickness of the frost is
greater than 4-5 mm.

Defrost the appliance.

The door has been
opened often.

Open the door only if necessa-
ry.

There is no cold air circula-
tion in the appliance.

Make sure that there is cold air
circulation in the appliance.

If the advice does not lead

to the desired result, contact

the nearest Authorised

Service Centre.

8.2 Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective

door gaskets. Contact the Authorised

Service Centre.

8.3 Replacing the lamp

CAUTION!

Disconnect the plug from

the mains socket.

1. At the same time, with the fingers

expand up and down the transparent

cover and unhook it in the direction

of the arrows.

1

1

2

2. Replace the lamp with one of the

same power and shape, specifically

designed for household appliances.

(the maximum power is shown on the

light bulb cover).

3. Reassemble the lamp cover.

4. Connect the plug to the mains

socket.

5. Open the door.

Make sure that the light comes on.

9. INSTALLATION

WARNING!

Refer to Safety chapters.

9.1 Positioning

This appliance can be installed in a dry,

well ventilated indoor where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance:

Climate
class

Ambient temperature

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

www.aeg.com

32

Advertising