Barco Nio Fusion 4MP - Manual (Page 26)

Display information
26
Information menu
Information
Changing Display Functions
Concepts
• The Display Function menu lets you select a display function
(DF).
• When you select the DICOM DF you can define the DICOM DF to
be recalculated taking an ambient light condition into account.
• In this case, the recalculation can be based on an illuminance
of 0 lux (“Dark Room”) or a preset value (“Preset”)
determined by the selected reading room.
• In the latter case you must select a reading room that
corresponds to the type of room the display is installed in.
E.g., if the display is installed in a room where CT scans are
observed, the “CT/MR/NM” reading room is the preferred
selection.
• The reading room is defined by 2 parameters:
Name Description
Product The display type
Serial No Indicates the display serial number
SW Number Displays the internal software number
SW Version Displays the current internal software version
Display Lifetime Indicates the total time the display has been
operating, including the time in stand-by
Backlight Lifetime Indicates the total time the display has been
operating, excluding the time in stand-by