AEG MC 4463 CD - Manual (Page 32)

English
32
For an MP3-CD/file: The number of files and titles are
then shown.
4. The CD will play from the first title. The current track, or
MP3 and the elapsed playing time are shown on the
display.
5. In order to remove a CD, please press the AUTO/STOP
button (9), open the CD compartment and lift the CD out
carefully.
Always keep the CD deck closed.
NOTE:
• When a disc is inserted upside down or when no disc is
inserted, “NO dISC” (no disc) is shown on the display.
• Playback of CDs produced by the user cannot be
guaranteed due to the large variety of software and CD
media available.
Description of the CD buttons
(20)
You can briefly interrupt and resume playback using this but-
ton. The symbol ” “ appears on the display. Pressing again
continues playback.
/ (5)
During music playback:
With you can jump to the next or previous track etc.
• If the button is kept pressed down, the machine starts to
search through the tracks. (The sound is thereby set to
mute.)
The button can be used as follows:
Press once =
This jumps back to the previous track.
Press twice = This plays the song before etc. If the button
is kept pressed down, the machine starts
to search through the tracks. (The sound is
thereby set to mute.)
AUTO/STOP (9)
The music playback is stopped. If an audio CD is inserted,
the overall number of songs and the playback time of the
CD are now displayed. In case of an MP3 CD or USB storage
medium, the number of folders and the overall number of
songs will be displayed.
In Radio mode:
Press this button to start automatic station scanning. Impor-
tant: The stations that you stored previously are overwritten.
REPEAT (15)
In case of a playing Audio CD:
Press once =
(REP emits a fixed light) the current
track is repeated continuously.
Press twice = (REP ALL all emits a fixed light) the
whole CD is played continuously.
Press three times = all functions are cancelled. The normal
play mode is resumed.
Only with MP3 music playback:
Press once =
the current track is repeated continu-
ously (REP appears in the display).
Press twice = the current folder of the MP3 CD or of
the USB storage medium is repeated
continuously (REP ALB appears in the
display). You can select the individual
folders with the buttons ALB+ and ALB-
(4/21).
Press three times = the whole CD is played continuously
(REP ALL appears in the display).
Press four times = the function is deactivated and the CD
is played in the normal mode.
RANDOM (10)
The display contains the word RND and the track number
that is to be played first. All tracks are played back in random
order.
INTRO (16)
(The display shows INTRO) Each title of the CD is played for
10 seconds.
ALB+ or ALB- (4/21)
Press these buttons during playback to select the next folder
up or down. If this button is pressed in stop mode the display
also appears briefly. Then start playback with the
button
(20).
10+ (3)
Is used to directly enter a title number.
• Press the button once, titles above 10 can be entered.
01- appears on the display.
• If there are more than 19 titles on a CD or USB storage
device, the entry option can be increased by 10 titles
each time you press the button. 02- etc. appears on the
display.
Programmed Play
This can be used to program any desired sequence of tracks.
(Only for CD/USB operation)
1. Press the AUTO/STOP button (9).
2. Press the PROG button (22). “P01” (preset location)
appears on the display and the title “00” or “000” in the
case of MP3 CDs/files. Use the / buttons (5) to
select the desired track and then press the PROG button
again. The display changes to memory slot P02.