7 band eq, Speaker setup, Menu settings – Blaupunkt IVDM-7002 User Manual
Page 36
35
Menu Settings
7 Band Equalizer
Press SETUP button on the remote and press the SRC button
repeatedly to move to Audio setup mode
- Press [
or
] button to activate the 7 Band Equalizer setup
menu and press the ENTER button.
- Press [
or
] button to select preset EQ and press SRC to exit.
- Total of 7 EQ modes are available: 6 preset and 1 user selection.
- Flat > Classic > Jazz > Rock > Pop > Ballad > Dance > User
Note: To adjust any frequency individually, choose your EQ mode
press ENTER.
Press [
or
] to select your frequency. Then press [
or
] to
adjust the gain (+6 /-6) of the selected frequency. Press SRC to
exit.
Speaker Setup
Press SETUP button on the remote and press the SRC button
repeatedly to move to Audio setup mode
- Press [
or
] button to activate the Speaker Setup menu and
press the ENTER button.
- Press [
or
] button to select (Front, Rear, Center, Subwoofer)
header press the ENTER button.
- Press [
or
] button to select speaker size within chosen header.
Press the ENTER button to select.
Note: Front speaker setup does not support “None” since all the
vehicles are equipped with front speakers. Large/Small indicates the
physical size of the speaker being used. Selecting SMALL will filter
lower frequencies to protect it. Selecting LARGE will allow full range
to the indicated speaker.