Bissell 3920 EN - Manual (Page 7)

Handle positions
press the handle release pedal, located on the lower
left side of the vacuum, with your foot to place your
vacuum into one of three cleaning positions.
1. Upright – For storage and above floor
cleaning with tools.
2. normal cleaning – Press handle release
pedal once. Position used for most
household floor cleaning tasks.
3. low cleaning – With the vacuum in normal
cleaning position, press handle release pedal
again. Use for reaching under low furniture
such as tables, chairs or beds.
Height adjustment
the powerfoot/rotating floor brush on your vacuum
can be adjusted to clean several floor surfaces.
notE: for optimal cleaning performance,
adjust to the lowest practical setting. If
your cleaner is difficult to push, adjust to
the next higher setting.
1. Turn height adjustment knob to desired setting.
bare floor For non-carpeted,
indoor surfaces
pet hair Setting Use when the pet hair
lifter is flipped down
Medium Setting For short and medium
pile carpets
highest Setting For plush pile carpet
Pet Hair Lifter
Use to pick up pet hair from carpeted surfaces. Just
vacuum like you normally would. the vacuum will
grab pet hair when you pull back and it will release
hair and suction it up when you push forward.
notE: turn vacuum off before you flip up or
flip down the pet hair lifter.
1. To vacuum carpeting, while vacuum is in
upright position flip down until it clicks into
place on the front of the foot. Turn height
adjustment knob to pet hair setting.
2. To vacuum non-carpet surfaces flip up. Push the
yellow release button just above the feature, and
it will flip up and out of the way.
O
perations
7
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
Tip:
Before cleaning under low furniture, check
area first for objects that might harm the unit
or block the vacuum hose.
1. 2.
3.
1.
2.