Blue Rhino 235000 User Manual

Page 11

Advertising
background image

Contact 1-800-762-1142 for assistance.

Do not return to place of purchase.

®

Owner’s manual: model 235000 outdoor patio heater 6/11/04

9

Contact 1-800-762-1142 for assistance.

Do not return to place of purchase.

®

Owner’s manual: model 235000 outdoor patio heater 6/11/04

10

Step 9 – Connect Gas Line to Engine

Attach Gas Line to Control Valve:

Pull collar of Gas Line back.

Insert Gas Line over Control Valve.

Release collar and it should lock in place. (Tip – push Gas Line up from
bottom of Post to make a good seating before releasing the collar.)

Gently tug on line to test for proper connection. If Gas Line moves you
are not properly connected. Do not proceed until you have a proper
connection.

Fully tighten the (4) screws from Step 7.

Step 10 – Attach Top Dome to Emitter

Gently lay Heater on its side using one styrofoam insert to prop
up top half.

Align holes in Dome with threaded studs in Emitter brackets.

Secure Dome to Emitter using (3) Cap Nuts. Tighten using 13 mm
wrench.

Stand heater upright.

NOTE:

The white ceramic cone in the top of the
engine is an important piece. DO NOT
REMOVE.

Step 11 – Secure Gas Line

Make sure angled side of Gas Clip pokes up through large hole in
Platform.

Tighten screw until Gas Line is held securely in place.

Stand Heater upright.

Section View

Gas Line

Clip

Gas Line

Bottom View

Advertising