Black & Decker WP1300 - Manual (Page 5)

E N G L I S H
5
First , ensure that the polisher disc is resting on the
work surface. Grasp polisher and turn it on. Move it in
long, sweeping strokes along the surface, letting it do
the work.
4. Handy Hints
• This polisher is a random orbit polisher. it is designed to
wobble. The wobbling motion produces the fine, swirl
free finish.
• For best results, use light pressure only, letting the
polisher do the work.
• Exercise caution around edges, corners or small surface
areas. Prolonged polishing on edges and corners can
damage these areas.
• Polishing bonnet can be hand washed in warm water
and mild detergent. It can be machine dried at the
lowest setting however air drying is recommended.
• DO NOT USE ABRASIVE COMPOUNDS. Liquid wax
is recommended to use with this polisher.
• The polishing bonnet is only to be used for the final buff.
Do not use it to apply wax.
5. Maintenance
Use only mild soap and damp cloth to clean the tool. Never
let any liquid get inside the tool; never immerse any part of
the tool into a liquid.
1. The brushes should be checked periodically and
worn-out brushes should be replaced in time. After
replacing, inspect whether the new brushes can
move freely in the brush holder. Keep running the
motor for 15 minutes to match the contact of the
brushes and commutator.
2. Keep the vent passage clear from dirt, clean off the
accumulated dust and oil dirt periodically.
3. During normal operation, if anything happens, the power
supply should be cut off at once and the tool should be
checked and repaired.
IMPORTANT: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment (other
than those listed in this manual) should be performed by
authorized service centers or other qualified service
organizations, always using identical replacement parts.
Caution: Only qualified serviceman can repair
the tool.
Accessories
Auxiliary handle 1pc
Spanner 1pc
Polisher disc (
Φ
180mm) 1pc
Woolen fabrics cover 1pc
Warning: The use of any accessory not
recommended for use with this tool could be
hazardous. Do not use bonnets that tie with a
string. The WP900 polisher is designed for
use with bonnets that use an elastic band to
hold them on the platen.