Before first use, 2 multitab, Activating the multitab option – AEG F65042W0P User Manual

Page 28: 3 demo mode

Advertising
background image

5.2 Multitab

This option deactivates the flow of rinse
aid and salt. The related indicators are
off.
The programme duration can increase.

Activating the multitab option

Activate or deactivate the multi-
tab option before the start of a
programme. You cannot activate
or deactivate this option while a
programme operates.

1. Open the menu option.
2. Go to Multitab and activate the mul-

titab option.

3. Press OK to confirm.
4. Press the return touchpad to close

the menu option.

The option stays on until you de-
activate it. Go to menu option
and deactivate the multitab op-
tion.

If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1.
Deactivate the multitab option.

2. Set the water softener to the highest

level.

3. Make sure that the salt container and

the rinse aid dispenser are full.

4. Start the shortest programme with a

rinsing phase, without detergent and
without dishes.

5. Adjust the water softener to the wa-

ter hardness in your area.

6. Adjust the released quantity of rinse

aid.

5.3 Demo mode

With this option you can simulate a pro-
gramme.
Factory setting: off.
1. Open the menu option.
2. Go to Demo mode and activate the

option. The option is active when you
see DEMO in upper left corner of the
display.

Deactivate the Demo mode if
you want to use the appliance.

6. BEFORE FIRST USE

1. Activate the appliance.
2. The display shows the default lan-

guage: Language English.
• Press OK to confirm.
• Press one of the menu touchpads

to set a different language and
then press OK to confirm.

3. The display shows the time message.

Press one of the menu touchpads to
set the time.

4. Press OK to confirm. The display

shows the ‘ Programs ’ area.

5. Make sure that the set level of the

water softener agrees with the water

hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.

6. Fill the salt container.
7. Fill the rinse aid dispenser.
8. Open the water tap.
9. Processing residues can stay in the

appliance. Start a programme to re-
move them. Do not use detergent
and do not load the baskets.

If you use the combi detergent
tablets, activate the multitab op-
tion.

28 www.aeg.com

Advertising