Starting a programme with delay start, Opening the door while the appliance operates, Cancelling the programme – AEG F65722IM0P User Manual

Page 33: At the end of the programme

Advertising
background image

7.2 Setting and starting a
programme

Starting a programme without
delay start

1. Open the water tap.
2. Press the on/off button to activate

the appliance.

3. Close the appliance door.
4. Set the programme. You can also set

the applicable options

5. Press the start touchpad, the pro-

gramme starts.
• If the salt container or the rinse aid

dispenser need refilling, the rela-
ted messages will show in the dis-
play. In this case the programme
will not start. Press again the start
touchpad to start the programme.

Starting a programme with
delay start

1. Set the programme. You can also set

the applicable options.

2. Set the delay start.
3. Press the start touchpad, the count-

down starts.
• If the salt container or the rinse aid

dispenser need refilling, the rela-
ted messages will show in the dis-
play. In this case the countdown
will not start. Press again the start
touchpad to start the countdown.

When the countdown is completed, the
programme starts.

Opening the door while the
appliance operates

If you open the door, the appliance
stops. When you close the door, the ap-
pliance continues from the point of inter-
ruption.

Cancelling the delay start
while the countdown operates

1. Press the start touchpad.

2. The display shows a message. Follow

the instructions to confirm the can-
celling of the delay start.

3. When the delay start is cancelled,

press the start touchpad to start the
set programme.

Cancelling the programme

1. Press the start touchpad.
2. The display shows a message. Follow

the instructions to confirm the can-
celling of the programme.

Make sure that there is detergent
in the detergent dispenser be-
fore you start a new programme.

At the end of the programme

An intermittent acoustic signal operates
and the display shows a message.
1. Press the on/off button to deactivate

the appliance.

2. Close the water tap.

If you do not press the on/off
button, the AUTO OFF function
automatically deactivates the ap-
pliance after some minutes. .
This helps to decrease the ener-
gy consumption

Important
• Let the dishes become cold before

you remove them from the appliance.
Hot dishes can be easily damaged.

• First remove the items from the lower

basket, then from the upper basket.

• There can be water on the sides and

on the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.

ENGLISH

33

Advertising