AEG HK634200FB - Manual (Page 24)

Use the sensor fields to operate the appliance. The displays, indicators and
sounds tell which functions operate.
Sensor field Function
1 To activate and deactivate the appli-
ance.
2
To lock / unlock the control panel.
3 Timer indicators of cooking
zones. To show for which of the cooking zones
you set the time.
4
The timer display To show the time in minutes.
5 To activate the Power function.
6 A heat setting display To show the heat setting.
7 A control bar To set the heat setting.
8 / To increase or decrease the time.
9 To set the cooking zone.
10 To activate and deactivate the STOP
+GO function.
3.3 Heat setting displays
Display Description
The cooking zone is deactivated.
- The cooking zone operates.
The function operates.
The Automatic Heat Up function operates.
Power function operates.
+ digit There is a malfunction.
/ / OptiHeat Control (3 step Residual heat indicator) : con-
tinue cook / stay warm / residual heat.
Lock / The Child Safety Device operates.
Not correct cookware or too small or no cookware on
the cooking zone.
The Automatic Switch Off function operates.
3.4 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
\ \ The risk of burns
from residual heat!
OptiHeat Control shows the level of the
residual heat. The induction cooking
zones make the heat necessary for cook-
ing directly in the bottom of the cook-
ware. The glass ceramic is hot from the
heat of the cookware.
24 www.aeg.com