Daily use, 1 activating and deactivating, 2 automatic switch off – AEG HK653326XB User Manual

Page 8: 3 the heat setting, 4 using the cooking zones, 5 bridge function

Advertising
background image

3.4 OptiHeat Control (3 step

Residual heat indicator)

WARNING!

/ / There is a risk of

burns from residual heat.

The indicator shows the level

of the residual heat.

The induction cooking zones make the

heat necessary for cooking process

directly in the bottom of the cookware.

The glass ceramic is heated by the heat

of the cookware.

4. DAILY USE

WARNING!

Refer to Safety chapters.

4.1 Activating and

deactivating

Touch for 1 second to activate or

deactivate the hob.

4.2 Automatic Switch Off

The function deactivates the hob

automatically if:
• All cooking zones are deactivated.

• You do not set the heat setting after

you activate the hob.

• You spill something or put something

on the control panel for more than 10

seconds (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• The hob gets too hot (e.g. when, a

saucepan boils dry). Let the cooking

zone cool down before you use the

hob again.

• You use incorrect cookware. The

symbol comes on and the cooking

zone deactivates automatically after 2

minutes.

• You do not deactivate a cooking zone

or change the heat setting. After
some time comes on and the hob

deactivates. See below.

The relation between heat setting and

times of the function:

, 1 — 3 — 6 hours

• 4 — 7 — 5 hours

• 8 — 9 — 4 hours

• 10 — 14 — 1.5 hours

4.3 The heat setting

To set or change the heat setting:
Touch the control bar at the correct heat

setting or move your finger along the

control bar until you reach the correct

heat setting.

4.4 Using the cooking zones

Put the cookware on the cross / square

which is on the surface that you cook.

Cover the cross / square fully. Induction

cooking zones adapt to the dimension of

the bottom of the cookware

automatically. You can cook with the

large cookware on two cooking zones at

the same time.

4.5 Bridge function

This function connects two cooking

zones and they operate as one.
First set the heat setting for one of the

cooking zones.
To activate the function for left / right
cooking zones: touch / . To set or

change the heat setting touch one of the

left / right control sensors.

To deactivate the function: touch /

. The cooking zones operate

independently.
When you use only one cooking zone of

the pair we recommend that you use the

www.aeg.com

8

Advertising