Scarlett SC-052 - Manual (Page 3)

3
CAUTION:
· Do not cover the appliance when is use.
ASSEMBLING
· First put the unit upside down.
· Install multidirectional rolling wheels to each end
between the first and the second groups of the
radiating flanges.
· Let the shape screw surrounding the dome of the
radiating flanges. Then insert it into two holes of the
supporting plate.
· Insert the butterfly nuts and screw them tightly counter
clockwise.
USING THE APPLIANCE
· Set the thermostat to position and power selector to position, insert the plug to the
power supply.
POWER SELECTOR
· You can adjust power of work of an oil heater, using power regulator:
- Off;
- minimal power;
- II medium
power;
- and II
simultaneously
maximum power.
THERMOSTAT
· Set the thermostat to position.
· When the temperature rises to which you are satisfied with, slowly turn the thermostat
counterclockwise until the indicator lights is out, and the room temperature thus can keep
constant.
· If you want to change the room temperature, you can make another regulation: turn the
thermostat clockwise to rise the temperature and counterclockwise to lower it, or turn the
power selector to
position.
FAN SWITCH
·
This appliance is equipped with additional function for convection warm air. To activate
this function, simply press the fan switch in front of the oil heater.
-
. Off;
- . On.
MODEL POWER REGULATION
RANGE (W)
SC-050 800/1200/2000
SC-052 1000/1500/2500