Brinkmann 810-4415-T - Manual (Page 28)

Step 15
To attach side burner assembly to
right side of grill body, insert four
M6 x 12mm bolts halfway into grill
body.
Step 16
Place side burner keyholes over
bolts and slide toward bottom of
grill, then tighten securely. Fasten
side burner front panel to grill body
with two M4 x 10mm bolts and two
M4 washers.
Step 17
Remove two bolts and spring
washers from the side burner
valve. Insert the side burner valve
stem through the hole in the side
burner table base, then firmly seat
the valve nozzle into the burner
venturi. Hold in place while you
perform Step 18.
Warning: Never use your grill
without leak testing all
gas connections and
hoses. See the section
on "Leak Testing" in this
manual for proper
procedures.
27
Side
Burner
Valve
Burner Venturi
Valve
Nozzle