Olympus SH-1 - Manual (Page 68)

68 EN
Using Wi-Fi function
Using the wireless LAN functions on the camera, you can connect to a
smartphone with Wi-Fi connectivity to view or transfer images on your
smartphone, and to operate the camera by remote control.
The position information will be added to images on the memory card.
To use this function, you must have the relevant app installed on the
smartphone.
http://oishare.olympus-imaging.com/
• G is displayed on images to which position information has been added. Log
position information is only available when using a smartphone with a GPS
function.
• Set the time and area of the camera precisely before using.
Before using the wireless LAN function, read “Precautions when using the
wireless LAN function” (P. 103).
If using the wireless LAN function in a country outside the region where the
camera was purchased, there is a risk that the camera will not conform to the
wireless communication regulations of that country. Olympus will not be held
responsible for any failure to meet such regulations.
Depending on the country or region, Wi-Fi and/or GPS is subject to the laws.
Therefore, you may not receive a repair service. Contact Olympus authorized
service station in advance.
As with any wireless communication, there is always a risk of interception by
a third party.
The wireless LAN function on the camera cannot be used to connect to a
home or public access point.
While charging with F-2AC and connecting to USB device, Wi-Fi connection
is unavailable.