Olympus WS-320M - Manual (Page 43)

43
3
Connecting to
Y
our PC
Disconnecting to Your PC
1 Click the on the task bar
located at the lower-right
corner of the screen. Click
[Safely Remove Hardware].
It will read [Stop USB Disk-Drive] for
Windows Me. The drive letter will
differ depending on the computer
being used.
2 When the safe to remove hardware window appears, click [OK].
3 Make sure that the display is turned off, disconnect the USB.
.......................................................................................................................................................
Notes
• NEVER disconnect the USB while the record/play indicator light and USB access indicator light are flashing
in red. If you do so, the data may be destroyed.
• Refer to the user's manual for your PC regarding the USB port or USB hub on your PC.
• Be sure to push the USB connector all the way in. Otherwise, the recorder may not operate properly.
• Use the supplied USB extension cable depending on situations.
1