Olympus FE-370 - Manual (Page 36)

36 EN
Adjusting the brightness of the monitor
[s]
x SETUP X s
Submenu 2 Application
BRIGHT/
NORMAL
Select the monitor brightness
depending on the surrounding
brightness.
Setting the date and time [ X]
x SETUP X X
“Setting the date and time” (p. 13)
To select the date and time display
order
1 Press d after setting Minute, and use
ab to select the date display order.
X
Y M
Y M D
D TIME
2008 10 26 12 30
MENU CANCEL
Date order
Selecting the video signal system to match your TV [VIDEO OUT]
x SETUP X VIDEO OUT
The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV’s video signal type.
Submenu 2 Application
NTSC Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on.
PAL Connecting the camera to a TV in European countries, China, and so on.
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV
1 Connect the TV and camera.
Connect to the TV video
input jack (yellow) and
audio input jack (white).
Multi-connector
AV cable (supplied)
Connector cover
book_FE370_en.indb 36 book_FE370_en.indb 36 6/12/2008 10:44:33 AM 6/12/2008 10:44:33 AM