Olympus Stylus 400 Digital - Manual (Page 40)

40 En
En
ERROR CODES
Monitor
indication Possible cause Corrective action
NO CARD
The card is not
inserted, or it cannot
be recognized. Insert a card or insert a different card.
Wipe the gold contacts with a
commercially available cleaning
paper and insert the card again. If the
problem persists, format the card. If
the card cannot be formatted, it
cannot be used.
CARD ERROR
There is a problem with
the card. Use a different card.
Insert a new card.
WRITE-
PROTECT
Writing to the card is
prohibited. Read-only has been set using a
computer. Use the computer again
to cancel the read-only setting.
CARD FULL
The card is full. No
more pictures can be
taken or no more
information such as
print reservation can
be recorded. Replace the card or erase
unwanted pictures. Before erasing,
download important images to a
PC.
NO PICTURE
There are no pictures
on the card. The card contains no pictures.
Record pictures.
PICTURE ERROR
There is a problem with
the selected picture
and it cannot be
displayed. Use image processing software to
view the picture on a PC. If that
cannot be done, the image file is
damaged.
The card is not
formatted. Format the card.
CARD COVER
OPEN
The card cover is
open. Close the card cover.
The date and time are
not set. Set the date and time.
POWER%OFF
FORMAt
CARD%SEtUP
SELECt GO
Y/M/D
basic_e_opx_6.fm Page 40 Thursday, December 12, 2002 10:44 AM