Olympus FE-100 - Manual (Page 14)

14
En
1
Press flash mode button ( ).
Flash setting screen is displayed.
2 Press [\ to select the flash mode, and press i.
You can also set by pressing repeatedly.
3 Press the shutter button halfway.
In conditions where the flash will fire, # lights (flash stand-
by).
4 Press the shutter button completely to take the picture.
Flash working range:
W (max.): Approx. 0.2 m to 3.8 m (0.7 ft. to 12.5 ft.)
T (max.) : Approx. 0.5 m to 2.2 m (1.6 ft. to 7.2 ft.)
To save battery power, the camera automatically enters to the sleep mode and
stops operating if not used for 30 seconds. The monitor switches off automatically.
Press the shutter button,
l or k to turn the monitor on. You can select the
length of time after which the camera automatically enters to the sleep mode.
If the camera is not operated for 30 minutes after the camera enters sleep mode,
it automatically retracts the lens and turns off. To resume operation, turn on the
power again.
Icon Flash Mode Description
No
indication
Auto flash The flash fires automatically in low light or backlight
conditions.
!
Red-eye
reduction flash The red-eye reduction flash mode significantly reduces this
phenomenon by emitting pre-flashes before firing the
regular flash.
# Fill-in flash The flash fires regardless of the available light.
$ Flash off The flash does not fire even in low light conditions.
Flash Modes
Power Save Feature
d4304_e_basic_00_bookfile_7.book Page 14 Wednesday, July 27, 2005 9:15 PM