38 en, Sequential shooting (drive), Using the led illuminator – Olympus Tough TG-310 User Manual

Page 38

Advertising
background image

38 EN

Sequential shooting (Drive)

Pictures are taken sequentially while the shutter button
is held down.

1

Select the drive option in the shooting

function menu.

0.0

0.0

AUTO

WB

AUTO

WB

AUTO

ISO

AUTO

ISO

P

P

Sequential

Sequential

MENU

MENU

14

M

44

N

ORM

Option Description

o

One frame is shot each time the
shutter button is pressed.

j

*1

Take sequential shots using the
focus, brightness (exposure) and
white balance set in the fi rst frame.

W

The camera takes sequential shots
at a faster speed than in [j].

*1

The shooting speed varies depending on the settings
for [Image Size/Compression] (p. 40).

When set to [j], the fl ash (p. 34) cannot be set to

[Redeye]. In addition, when set to [

W] the fl ash is

fi xed to [Flash Off].

When set to [

W], [Image Size] is limited to [3] or

lower, and the ISO sensitivity is fi xed to [ISO Auto].

Using the LED illuminator

(TG-610 only)

(TG-610 only)

In a dark location, the LED illuminator can be used as an
auxiliary light to see things or compose shots.

1

Set [LED Illuminator] (p. 55) to [On].

2

Press and hold

E down until the LED

illuminator lights up.

If you perform an operation when the LED
illuminator is on, it will illuminate up to approx. 90
seconds.

LED illuminator

The LED illuminator turns off if no operation is

performed for approx. 30 seconds.

Even when the camera’s power is turned off, if

E is

pressed until the LED illuminator lights up, it lights for
30 seconds.

To turn the LED illuminator off

To turn the LED illuminator off

Press and hold

E down, until the LED illuminator

turns off.

Advertising
This manual is related to the following products: