Olympus Stylus Verve - Manual (Page 138)

138
5
Conn
ec
ting Co
mput
er
Operational Sequence
You can transfer images from the card in the camera to your computer by connecting
the camera to the computer with the supplied USB cable.
Use of the AC adapter and power coupler (sold separately) is recommended
when using the camera with a computer. When using the battery for the camera
connected to a computer, be sure that the battery has sufficient power. Note that
the camera’s battery will continuously discharge (use energy) when connected
(communicating) with a computer. If the battery power is exhausted, the camera
will stop operating and the computer may malfunction and the image data (files)
being transferred may be lost.
Do not turn the camera off when the camera is connected with a computer, doing
so may cause a malfunction.
If the camera is connected to a computer via a USB hub, reliable operation
cannot be guaranteed. If a malfunction should occur, connect the camera directly
to the computer without using the USB hub.
Utilizing the images imported in a computer
Î
Be sure to copy the images to the computer before editing the images using
graphic software. Depending on the application software used, editing images
(such as rotating) on the picture card may cause damage to the file data on the
card.
If the image data cannot be transferred from the card in the camera connected
using the USB cable
Î
Use an xD-Picture Card adapter (sold separately) depending the operating system
for transferring the image data from the xD-Picture card to a computer. For details,
refer to Olympus homepage.
Installing OLYMPUS Master gP.140
Connecting the camera to computer using supplied USB cable gP.146
Activating OLYMPUS Master gP.148
Saving pictures on computer gP.150
Disconnecting the camera from your computer gP.151