Olympus STYLUS 7010 - Manual (Page 40)

40 EN
Adjusting the brightness of the monitor
[s]
E SETUP s
To adjust the monitor brightness
1 Use kl to adjust the brightness while
viewing the screen, and then press the E
button.
s
SET OK MENU BACK
Setting the date and time [ X]
E SETUP X
“Setting the date and time” (p. 13)
To select the date display order
1 Press n after setting Minute, and use
kl to select the date display order.
2009 10 26 12 30
OK
X
Y M D
TIME
MENU CANCEL SET
Y M D
Date order
Setting the date and time for another
time zone [DUALTIME]
E SETUP DUALTIME
When [DUALTIME] is set to [ON], the date and
time set here are used in image fi le names,
dated prints and other data.
Submenu 2 Submenu 3 Application
OFF —
Switches to the date and
time set in [
X].
ON
(Proceeds to
the setting
screen
*1 .)
The date and time settings
from [DUALTIME] are used
in fi le names, dated prints
and other data.
*1 The setting procedure is identical to that in “Setting the
date and time” (p. 13).
The date display order is the same as that set
with [ X].
Automatically rotating images shot with
the camera in a vertical position during
playback [PIC ORIENTATION]
(STYLUS-7020/μ-7020 only)
E SETUP PIC ORIENTATION
During shooting, the [y] (p.35) setting on the
playback menu is set automatically.
This function may not work properly if the
camera is facing upwards or downwards during
shooting.
Submenu 2 Application
OFF
Information about the vertical/
horizontal orientation of the camera
during shooting is not recorded with
images. Images shot with the camera
in a vertical position are not rotated
during playback.
ON
Information about the vertical/
horizontal orientation of the camera
during shooting is recorded with
images. Images are automatically
rotated during playback.