Olympus D-550 Zoom User Manual
Page 79
Adjusting the color tone (White balance)
Adjus
tin
g
th
e ima
g
e qua
lity a
nd ex
posure
4
78
5
Press
to select one of the
white balance modes: AUTO,
,
,
or
, then press
.
The white balance is set.
To close the menu, press
again.
6
Take the picture.
• The white balance setting returns to AUTO (factory default setting)
when the lens barrier is closed. “Saving the settings (All Reset)”
(
• If you want a color tone that resembles what you see under tungsten
lighting, set the white balance mode to
.
• White balance may not be effective under some special light sources.
• After setting a white balance mode other than AUTO, play back the
picture and check the colors on the monitor.
• When the flash is fired with a white balance setting other than AUTO,
colors may appear different in the resulting picture from the colors
you see on the monitor.
CARD
SEt
CAM
PICtURE
AUtO
WB