Olympus E-P5 - Manual (Page 86)

86 EN
Menu functions (Custom menus)
4
I /H The button can be used to choose between I and H while
the underwater case is attached. Press and hold the button to
return to the previous mode. This enables
U (Underwater) to
be set in WB mode. When using an ED12-50mmEZ lens with
power zoom (E-ZOOM), the lens is automatically zoomed to
the WIDE end or TELE end in accordance with I and H
switching.
Live Guide Press the button to display live guides.
b (Digital Tele-converter) Press the button to turn digital zoom on or off.
a (Magnify)
Press the button to display the zoom frame. Press again to
magnify the image. Press and hold the button to turn off the
zoom frame.
Peaking Each press of the button switches the monitor between
display/non-display. When Peaking is displayed, histogram
and highlight/shadow display are not available.
AF Stop Stop autofocus.
j/ Y Choose a sequential shooting or self timer option.
# Choose a fl ash mode.
HDR BKT Switch to HDR bracketing with the saved settings.
AE BKT Turns on AE BKT shooting using stored settings.
ART BKT Turns on ART BKT shooting using stored settings.
L Lever Function
MENU
c S L Lever Function
You can use the positioning of the lever to change the function of the dials and buttons.
Table of lever position and functions assigned to dial/buttons
Mode Lever position = 1 Lever position = 2
mode1
Dial functions are based on [Dial
Function] settings. Main dial: White balance
Sub-dial: ISO
mode2
Dial functions are based on [Dial
Function] settings. Main dial: ISO
Sub-dial: White balance
mode3
R button function is based on
[
RFunction] setting.
R button starts/stops movie
recording.
mode4
The AF modes assigned to the lever positions apply. The default setting
for lever position = 2 is [MF].