Olympus C-740-C-760 Ultra Zoom - Manual (Page 168)

167
Troubleshooting
Mis
cellane
ous
10
Possible cause Corrective action Ref. Page
The settings are returned to the factory default settings when the
camera is turned off.
ALL RESET is set to
ON. Select the SETUP tab in the mode menu and set
ALL RESET to OFF. P.128
No picture is displayed on the TV when connected to the camera.
The video output
signal is incorrect. Set the video output signal according to the region
where used. P.151
The camera is not in
the playback mode. Set the mode dial to any position except q. P.120
The TV video signal
setting is incorrect. Set the TV to the video input mode. P.120