Olympus Stylus 1030 SW - Manual (Page 25)

Me
nu opera
tions
EN
25
[COMBINE IN CAMERA 1]
While panning the camera, the camera automatically shoots and combines pictures for a
single panoramic picture in the camera. Only combined pictures are saved.
• Take the first picture.
• When you slightly move the camera in the direction of the next picture, a target mark and a
pointer appear.
• The pointer moves as you pan the camera. Move the camera slowly and steadily until the
pointer overlaps the target mark, then stay still.
• The camera shoots the second picture automatically.
• After the current subject appears on the monitor, take the third picture in the same manner
as the second one.
• After the third picture is taken, the pictures are automatically combined, and then the
combined picture is displayed. To combine only two pictures, press o before shooting the
third picture.
• To cancel making the panoramic picture during shooting, press m before pressing o.
[COMBINE IN CAMERA 2]
Pictures are manually shot, and the camera automatically combines pictures for a single
panoramic picture in the camera. Only combined pictures are saved.
• Use 43 to specify at which edge you want to connect the pictures, and then take the first
picture.
• Compose your second shot so that the edge of the first picture overlaps the edge of the
second picture, then shoot.
• Take the third picture in the same manner as the second one.
• After the third picture is taken, the pictures are automatically combined, and then the
combined picture is displayed. To combine only two pictures, press o before shooting the
third picture.
• To cancel making the panoramic picture during shooting, press m before pressing o.
SAVE OK MENU CANCEL MENU CANCEL SAVE OK MENU CANCEL SAVE OK MENU CANCEL
2nd 3rd
Target mark
Pointer
Connects pictures
from left to right
1st
Connects pictures
from left to right
SAVE OK MENU CANCEL MENU CANCEL SAVE OK MENU CANCEL
1st 2nd 3rd
d4354_e_0000_7.book Page 25 Thursday, December 20, 2007 10:25 AM