Beko 40WLU550FHID - Manual (Page 31)

29
TO REMOVE A CI CARD
When removing the CI card, make sure you pull out the CAM complete with the
card fitted.
This function enables you to watch the scrambled services (pay services) in some
channels. If you remove the CI Module, you can only watch the available non
scrambled digital programmes.
2- Press the Standby button on the remote to turn on the TV.
3- Press the INPUT button on the remote to display the Source List. Use the Up/
Down buttons to select DTV, and press the OK button.
4- If the CI card is inserted properly, the CI MODULE will briefly be displayed on
screen, The contents are dependent on the CAM provider in you country.
9.8- How To Connect CI (Common Interface) Card
1- To view the scrambled (pay) services in digital TV mode.
TO INSERT A CI CARD
(NOTE: The card on its own cannot be used on this TV. A CAM (Conditional Access
Module) must be purchased and the card inserted into the CAM. The CAM / card
holder is then inserted into the CI slot on the TV.)
Insert the CAM / holder card into the slot in the direction of the arrow until it is fully
located.
Side or Rear view of TV