Olympus IR-300 - Manual (Page 21)

TAKING A PICTURE
21
En
3
Take the picture.
Note
Press the shutter button gently. If it is pressed forcefully, the camera may
move causing the picture to blur.
Never open the battery compartment/card cover, remove the battery or
disconnect the AC adapter while the self-timer/card access lamp is blinking.
Doing so could destroy stored pictures and prevent storage of pictures you
have just taken.
Recorded pictures are saved in the camera regardless of whether the camera
is turned off or the battery are replaced or removed.
When taking pictures against strong backlight, the area of the picture in
shadow may appear colored.
When the shutter button is pressed, the memory gauge lights and the
picture is recorded. The memory gauge changes according to how many
pictures the camera is processing. This indicator is not displayed while
recording movies.
The camera takes the picture. The
self-timer/card access lamp blinks
while the picture is recorded.
5M 5M
55
Press the shutter button fully.
Memory gauge
Memory gauge
a b c d
Before taking
any pictures
(Off)
Maximum reached
(All lit)
Wait until the indicator
turns off again before
taking more pictures.
After taking
one picture
(Lit)
After taking
several pictures
(Lit)
Shoot Shoot Shoot
Wait
d4243_basic_e_00_bookfile_7.book Page 21 Thursday, January 27, 2005 3:37 PM