Olympus E-520 - Manual (Page 115)

115
EN
12
Shooting tips and maintenance
Extending the useful life of the battery
Performing any of the following operations when not actually taking pictures can deplete the
battery power.
• Repeatedly pressing the shutter button halfway
• Repeatedly playing back the captured images over a long period of time
• Using the live view function over a long period
To save battery power, turn off the camera whenever it is not in use.
Functions that cannot be selected from menus
Some items may not be selectable from the menus when using the arrow pad.
• Items that cannot be set with the current shooting mode
• Items that cannot be set because of an item that has already been set:
Combination of [j] and [NOISE REDUCT.], etc.
Cannot use the Imager AF
Imager AF is available only when using compatible lenses. For the latest information about
Olympus lenses compatible with Imager AF, visit the Olympus website.
Selecting the optimal record mode
Record modes are divided into 2 main types: RAW and JPEG. RAW records without
reflecting the settings for white balance, contrast, etc. on the images themselves. JPEG
records as images that reflect these settings. JPEG also compresses images to reduce the
file size when recording them. For JPEG, you can register four combinations of images sizes
(Y, X, W) and compression rates (SF, F, N, B) from the 12 total combinations available. The
higher the compression rate, the grainier the image will appear when enlarged during display.
A rough guide for selection is shown below.
To make fine-adjustments of the shooting settings on the computer
• [RAW]
To print large images on A3/A4 paper/To edit and process images on a computer
• Images size Y and compression rate SF, F, N, or B
To print postcard-size images
• Images size X and compression rate SF, F, N, or B
To send as an e-mail attachment or post on a web site
• Images size W and compression rate SF, F, N, or B
g“Record mode and file size/number of storable still pictures” (P. 128)
To restore functions to their settings at the time of purchase
• The settings are saved even when the power is switched off.
• To return to the factory default settings, set [RESET] under [CUSTOM RESET] (even so,
the settings of some functions, like the [CONTRAST] settings, will be saved nonetheless).
You can register up to two types of settings to be reset. Set various functions of the camera
and register using [RESET1] or [RESET2] under [CUSTOM RESET].
g“Resetting to the
factory default settings” (P. 30)
s0018_e_00_0_unified.book Page 115 Tuesday, March 18, 2008 4:08 PM