Olympus LS-12 - Manual (Page 58)

4
4,9
10
2,6,
7
3
5
8
Editing [OPTION]
58
EN
Editing [OPTION]
Trimming a file [Trimming]
(LS-14 only)
A file can be trimmed down to just the required
portion and then re-saved.
3
Press the + or − button to select
[ Trimming ].
A
• Only a PCM file recorded with this recorder can be
trimmed.
• This function is not available when the File list
screen is displayed.
1
Select the file you want to trim.
2
While the recorder is in stop mode,
press the
F2 ( OPTION ) button.
• The [ OPTION ] screen appears on the
display.
4
Press the OK button.
5
Press the PLAY (
` ) button and play
the file to the position where you
want to start trimming.
• Forward the file to the position where you want
to start trimming. If the file is long, use the
9
button to move to the position you want to trim . 6
At the position where you want to
start trimming, press the
F2 ( START )
button.
• Playback will continue even after
the F2 ( START ) button is pressed. You can
rewind or fast-forward as usual to quickly
locate the trimming end position.