Olympus TG-830 iHS - Manual (Page 10)

10 EN
● Position data may be unavailable or contain errors
in the following locations:
● Locations without a clear view of the sky
(indoors, underground or underwater, or near
trees or tall buildings)
● Locations subject to strong magnetic or radio
interference (near high-voltage power lines,
magnets, electronic devices, or cell phones
operating in the 1.5 GHz band)
● GPS data may take more time acquire or be
unavailable in some locations or at certain times
of day.
● Do not cover the GPS antenna with your hands or
metal objects.
● If the battery is low, the camera cannot acquire
GPS data while the camera turns off.
● The camera is not equipped for GPS navigation.
● While [Track] is [On], the GPS receiver will
continue to draw power from the battery when the
camera is off.
● GPS data are not recorded with movies.
● Press the INFO button while the camera is turned
off. The current time and the shooting location are
displayed for approx. 30 seconds.
Learning how to use the
camera
● Press the n button to turn on the camera and
enter the standby mode. (Press the n button
again to turn off the camera.)
● Select the shooting mode, and press the shutter
button to shoot a still image.
● To shoot a movie, press the R button.
● Set the shooting functions using the function
menu or the setup menu.
● To view images, press the q button to switch to
playback mode.
● To return to standby mode, press the q button
again, or press the shutter button halfway down
and then release it.
● Press and hold the q button while the camera is
turned off to start up the camera in the playback
mode.
● In this case, pressing the q button again sets
the camera to the standby mode.