Olympus SP-560 UZ - Manual (Page 42)

42
EN
Menu ope
rati
ons
You can select the types of the sound and the picture displayed when the camera is turned on.
• Select [2] and press
3 to set the still picture saved in the internal memory or card as the startup
screen.
• The volume turns to the value set in [VOLUME].
g “VOLUME Adjusting the volume during playback” (P.42)
PW ON SETUP ........................................................ Setting the startup screen and sound
SCREEN OFF (No picture is displayed.) / 1 / 2
SOUND OFF (No sound) / 1 / 2
BEEP ........................................ Adjusting the beep sound and volume when button is pressed
OFF (No sound)
1 LOW / HIGH
2 LOW / HIGH
8 ................................................................... Adjust the volume of camera warning sound
OFF (No sound) / LOW / HIGH
SHUTTER SOUND ............................. Selecting the sound and volume of the shutter button
OFF (No sound)
1 LOW / HIGH
2 LOW / HIGH
VOLUME ................................................................. Adjusting the volume during playback
OFF (No sound) / 1 / 2 / 3 / 4 / 5
• Press 12 to adjust the volume.
• You can select [OFF] or adjust in 5 steps from 1-5.
REC VIEW ........................................................................... Viewing pictures immediately
OFF The picture being recorded is not displayed. This is useful when you
want to prepare for your next shot while the previous picture is being
recorded.
ON The picture being recorded is displayed. This is useful when you want
to quickly review the last picture taken. You can resume shooting while
the picture is still being displayed.
screen and sound
sound and volume when button is
f camera warning sound
and volume of the shutter button
e during playback
OK
2
1
3
6
7
SHUTTER SOUND
VOLUME
REC VIEW
MENU DISPLAY
4
5
S E T U P
OK SET MENU BACK
8
mediately
d4355_e_unified_forU-Print_00_bookfile.book Page 42 Thursday, July 12, 2007 11:01 AM