Olympus D-380 - Manual (Page 78)

77
Ca
mera
se
tt
ings
Viewing a picture immediately after shooting (Rec View)
You can view the picture you have just taken on the monitor for 3 seconds
while it is being recorded.
Rec View settings
ON : The picture being recorded is displayed on the monitor. This is useful for a brief
check of the picture you have just taken. Pressing the shutter button halfway
during Rec View lets you resume shooting immediately.
OFF : The picture just taken is not displayed. This is useful when you want to prepare for
your next shot while the previous picture is being recorded.
1
Display the top menu in the shooting mode.
• Open the lens barrier.
• Press .
2
Press to select MODE MENU.
3
Press to select the SETUP tab, then press .
4
Press to select REC VIEW,
then press .
5
Press to select ON.
Rec View is set.
To close the menu, press
twice.
The Rec View setting remains even when the lens barrier is closed.
CAM
PIC
CARD
SEtUP
REC VIEW
ALL RESEt
CAM
PIC
CARD
SEtUP
ALL RESEt
REC VIEW OFF
ON