Olympus IR-500 - Manual (Page 21)

21
Operating the camera
Usi
n
g
t
h
e remo
te co
n
tro
l fo
r
p
la
yb
ack
Operating the camera
You can use the remote control to play back images on the camera monitor or TV screen. The
same operations (such as selecting or deleting images, etc.) can be performed in the same manner
as the camera buttons.
When using the remote control, set the camera on the cradle.
1
Connect the AC adapter to the cradle, and set the camera on the cradle.
Set the camera with the multi-swing display raised and the remote control window facing
forwards.
2
Make sure that the camera is turned on.
• The mode selection screen appears.
• If the camera is turned off, press the power switch on
the camera or POWER button on the remote control.
• If the storage unit is connected, the “QDOCK
MODE” screen appears. Select “EXIT,” then press
9 to exit the screen.
3
Press the
a or c button on the remote control to select the desired
mode.
STORAGE: Displays the data on a Dock&Done-compatible storage unit.
REPLAY: Displays the images on the camera.
ALBUM: Displays the images on the camera in the album display mode.
CALENDAR: Displays the images on the camera in the calendar display mode.
CLOCK: Displays the clock.
Turn the camera connector
dial of the cradle to this mark.
Power lamp/
Remote control lamp
Remote control window
REPLAY
ALBUM
CALENDAR
STORAGE
SELECT MODE
GO SELECT
00E up date Adam .book Page 21 Thursday, March 24, 2005 1:57 AM