Self-timer, Power save feature – Olympus FE-220 User Manual
Page 14
14
En
Self-Timer
1
Press N
Y to select [Y] and press i.
2
Press the shutter button completely to take the
picture.
After setting the self-timer, press the shutter button
completely. Then the self-timer lamp lights for
approximately 10 seconds, blinks for approximately
2 seconds, and the shutter is released.
Power Save Feature
To save battery power, the camera automatically enters sleep mode and stops
operating if not used for approximately 3 minutes. Press the shutter button or
zoom lever to reactivate the camera.
If the camera is not operated for 12 minutes after the camera enters sleep
mode, it automatically retracts the lens and turns off. To resume operation, turn
on the power again.
Self-Timer Lamp
d4337_oai_e_basic_00_bookfile.book Page 14 Wednesday, November 29, 2006 5:45 PM