Bush Hog TOUGH 121 - Manual

Bush Hog
®
TOUGH
121 & 176 Rear Mounted Blades
BUsH HOG ® TOUGH FeaTURes
TOUGH Heavy Duty Reinforced Moldboard
TOUGH Reinforced High strength Hitch
TOUGH Heavy Duty King Pin
TOUGH Heavy Duty Mainframe
TOUGH Double strap Hitch
TOUGH Powder Coat Paint
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
176 series Blade
121 series Blade
MODels 121 176
Moldboard Widths 8 and 9 ft 9 and 10 ft
approximate Weight 885 lbs (8 ft), 910 lbs (9 ft) 1381 lbs (9 ft), 1408 lbs (10 ft)
Maximum Tractor HP 120 PTO (2WD); 95 PTO (4WD) 175 PTO (2WD); 140 PTO (4WD)
Type Hitch 3 Point Category II or III or Quick Hitch 3 Point Category II or III or Quick Hitch
Moldboard Height and Thickness 20 inches x 1/4 inches 20 inches x 3/8 inches
Moldboard Cutting edge 1/2 x 6 inches, Reversible 1/2 x 6 inches, Reversible
King Pin Diameter 4 inches 5 inches
Tilt adjustment 15° Up and Down 15° Up and Down
Offset adjustment 35 inches left or right 35 inches left or right
angle adjustment 45° left or right 45° left or right
Blade Parking stand Standard Standard
Options End Plates, Manual or Hydraulic Gauge Wheel, Cushion Valve Kit, Skid Shoes on 121
Warranty 1 year limited warranty