Olympus ED 300mm f2.8 - Manual (Page 8)

15 14
Attaching the Lens Strap
Nomenclature
①Focus stop buttons (x4)
②Drop-in filter
③Mounting index
④Rear cap
⑤Strap attachment
⑥Focus limit switch
⑦Focus ring
⑧Filter mount thread
⑨Hood attaching section
⑩Electrical contacts
⑪Tripod mount
Attaching Lens Hood LH-120
<During use>
<During storage>
Filters
The lens comes with the following filters.
①Standard clear filter SCF-43 .... Always mount this filter when not using any
of the other filters.
②ND4-43 .................................... Decreases the amount of light entering the
lens by 1/4.
③ND8-43 .................................... Decreases the amount of light entering the
lens by 1/8.
④Drop-in PL filter DPF-43
This filter eliminates surface reflected light.
The amount of reflected light eliminated can be adjusted with a rotary lever.
Attaching the Lens Case Strap
Before mounting the hood on the lens, be sure to fit
the claw inside the lens hood into the groove at the
edge of the lens barrel.
To mount the hood on the lens for storage, put the
hood on the lens as shown and fit the claw inside
the lens hood securely into the groove at the edge
of the lens barrel.