Olympus FE-200 - Manual (Page 58)

58
EN
Ge
tt
in
g
t
o
k
now
yo
ur
c
a
mer
a
be
tt
er
Monitor indication Possible cause Corrective action
This card cannot be used
in this camera. Or, the
card is not formatted. Format the card or replace.
• Select [POWER OFF] and press
i
and then insert a new card.
• Select [FORMAT] [YES] and
press i. The card is formatted. All
data on the card is erased during
formatting.
There is an error in the
internal memory. Select [MEMORY FORMAT] [YES]
and press i. The internal memory is
formatted. All data in the internal
memory is erased.
NO CONNECTION
The camera is not
connected to the printer
correctly. Connect the camera and printer
correctly.
NO PAPER
There is no paper in the
printer. Load some paper in the printer.
NO INK
The printer has run out of
ink. Replace the ink cartridge in the printer.
JAMMED
The paper is jammed. Remove the jammed paper.
SETTINGS
CHANGED
The printer’s paper tray
has been removed or the
printer has been operated
while changing settings on
the camera. Do not operate the printer while
changing settings on the camera.
PRINT ERROR
There is a problem with
the printer and/or camera. Turn off the camera and printer. Check
the printer and remedy any problems
before turning the power on again.
r
CANNOT PRINT
Pictures recorded on
other cameras may not be
printed on this camera. Use a computer to print the pictures.
OK SET
CARD SETUP
POWER OFF
FORMAT
OK SET
POWER OFF
MEMORY FORMAT
MEMORY SETUP