Olympus EVOLT E-300 - Manual (Page 23)

23
En
Set the power switch to ON .
● To turn off the power, set the
power switch to OFF .
Set the mode dial to P .
–.– – – –.– .–
ESP
P
AUTO
FP
FOCUS
AUTO
AUTO ISO
DRIVE
S-AF
AF ILLUMINATOR
HQ
2448 3264
WB
s RGB
Power on
Monitor
When the camera is turned on, the control
panel screen is displayed on the monitor.
~ “Advanced manual”
Battery check
When the camera is turned on or when remaining battery power is low, the battery check
mark varies.
*1 Your digital camera's power consumption varies greatly depending on usage and
operating conditions. Under some operating conditions, the camera may turn off without
warning when the battery power is low. If this occurs, re-charge the battery.
*2 Blinks in the viewfinder.
Lights (green)
Remaining power
level: High
*1
Lights *2 (red)
Remaining power level: Low.
Charge the battery.
BATTERY EMPTY
is displayed.
Dust reduction function operation
The dust reduction function is automatically activated when the camera is turned
on. Ultrasonic vibrations are used to remove dust and dirt from the CCD surface.
The SSWF indicator blinks while dust reduction is working.
Date/time setting
Images will be stored with date/time data. The date/time information is used as
the basis for assigning file numbers to recorded images. ~ “Advanced manual”
Remaining power level:
Exhausted. Charge the battery.
SSWF indicator
01E-300BaEN-P1 04.10.21 9:49 PM Page 23