Olympus EVOLT E-330 - Manual (Page 21)

21
How to set the functions
Using
the functio
ns of t
he came
ra
1
Setting functions using the control panel screen
Select an item on the control panel screen and change the setting.
1
Press the i button.
• The cursor on the control panel screen lights.
2
Use the arrow pad p to move the cursor
to the function you want to set.
Eg.) When setting white balance
3
Turn the control dial to change the
setting.
• Pressing the i button while the item is being
selected displays the menu for that function.
Turn the control dial to change the setting.
• If you do not operate the control dial within a
few seconds, your setting will be confirmed
and the control panel screen will be restored.
Control panel screen Cursor
Control dial
i button p Arrow pad
Direct menu
Control panel operation procedures
This manual shows the control panel operation procedures (until the
direct menu is displayed) as below.
Eg.) When setting white balance
i
p WBi
s0003_e_advanced.book Page 21 Wednesday, December 28, 2005 2:33 PM