Olympus EVOLT E-410 - Manual (Page 44)

44
EN
Shooting functions
k
Various shooting functions
3
Press the shutter button all the way.
• A picture is taken.
• When
Y12s is selected:
First, the self-timer lamp lights up for approximately 10
seconds, then it blinks for approximately 2 seconds and the
picture is taken.
• When Y2s is selected:
The self-timer lamp blinks for approximately 2 seconds,
then the picture is taken.
• To cancel the activated self-timer, press the </ Y/j button.
Eyepiece cover
When shooting without looking through the viewfinder, attach the eyepiece cover to the
viewfinder so that light does not enter the viewfinder. Attach the eyepiece cover after
removing the eyecup as illustrated. The same applies when replacing with an optional
eyecup.
Using the remote control
By using the optional remote control (RM-1), you can take a picture with yourself in it or a
night scene without touching the camera. The camera can be set to release the shutter either
right away or 2 seconds after the shutter button on the remote control is pressed. Bulb
shooting is also possible when using the optional remote control.
Mount the camera securely on a tripod, point the remote
control at the remote control receiver on the camera and
press the shutter button on the remote control.
• When <0s is selected:
The focus and exposure are locked, the remote control
lamp blinks and the picture is taken.
• When <2s is selected:
The focus and exposure are locked, the remote control
lamp blinks, then after approximately 2 seconds the picture
is taken.
x Notes
• Do not press the shutter button while standing in front of the camera; this could result in the
subject being out of focus since focusing is performed when the shutter button is pressed
halfway.
Self-timer lamp
Eyepiece cover
Eyecup
Remote control lamp
Remote control receiver
s0013_e_00_unified.book Page 44 Monday, March 5, 2007 10:04 AM