Olympus FE-250 - Manual (Page 59)

Appendix
EN
59
Removing the card
4
Push the card all the way in and
release slowly.
• The card protrudes slightly and stops.
• Grasp the card and remove.
5
Close the battery/card
compartment cover.
Note
• Do not open the battery/card compartment cover
while the card access lamp is blinking, as the lamp
is indicating that it is reading or writing data. Doing
so may damage the data in the internal memory or
the card and render the internal memory or card
unusable.
1 2
Card access lamp
d4339_e_0000_7.book Page 59 Friday, December 15, 2006 6:05 PM