Olympus FE-3010 User Manual
Using the self-timer
After the shutter button is pressed all the way
down, the picture is taken after a short delay.
Use kl to select the desired
setting option, and press the B
button to set.
The self-timer is deactivated.
The self-timer lamp turns on for
approx. 10 seconds, then blinks
for approx. 2 seconds, and then
the picture is taken.
Self-timer shooting is automatically canceled
after one shot.
To cancel the self-timer after it starts
Y button again.
Increasing the brightness of
the monitor ( Backlight boost)
in shooting mode. The monitor
becomes brighter. If there is no operation for 10
seconds, the previous brightness resumes.