BT FREESTYLE 7250 - Manual (Page 56)

56
BT Freestyle 7250 – Issue 02 – Edition 01 – 24.03.05 – 6763
4. Press SAVE . The display shows SYSTEM PIN CHANGED .
5. Press to return to standby or BACK to go one step
back in the menu.
Repeater mode
You can use a repeater to boost the range and reception
of your base. A repeater must be registered with the base
and the repeater function must be set to ON.
The default setting is off.
1. Press MENU then scroll DOWN to BASE SETTINGS and
press OK . Scroll DOWN to REPEATER MODE .
2. Press OK then LEFT or RIGHT to select ON or OFF .
3. Press SAVE to keep the settings displayed.
4. Press to return to standby or BACK to go one step
back in the menu.
Base settings